Our local chapter of SCI (SCIAUSTIN) is doing a raffle for an Ar-15 in 300 Blackout! Tickets are only $10, and only 500 tickets will be sold! This is for a $1600 rifle! Get your tickets today. Doesn’t matter where you live, the firearm can be shipped to your local FFL if you are not in the Austin area!
We will be selling a total of 500 raffle tickets for this awesome AR-15 at only $10 each! If you are not local to the Austin Area, we can ship to the FFL of your choice (shipping is at your cost). An opportunity to win a $1600 firearm for only $10, and all funds will be used for conservation and humanitarian service projects! The raffle will end when tickets are sold, raffle drawing will be videoed and posted online, and winner notified.
Advanced Armament Corporation complete MPW rifles in 16” barrel chambered for 300 AAC BLACKOUT.
A 30 caliber rifle the size of an AR15 5.56mm caliber rifle – without a reduction in magazine capacity. The AAC MPW in 300 AAC Blackout uses ordinary 223/5.56mm magazines for a full 30 round capacity, and 16 inch barrels.
Components are of premium quality. The 1:7 twist barrel is nitrided to provide extreme corrosion resistance and high hardness for a long life – outperforming chrome-lined barrels for longevity without the potential impediments to accuracy. The muzzle is threaded 5/8-24 and includes an AAC 51-tooth BLACKOUT™ flash suppressor with the complete upper. A Knight’s Armament free-floating URX III helps maintain accuracy while providing for the mounting of accessories. The bolt carrier group’s nickel boron (Ni-B) UCT EXO coating has a very high hardness and lower friction than either chrome or nickel teflon. There is also a base layer of high-phosphorous electroless nickel that ensures the extreme corrosion protection that is absent from other Nickel Boron carriers that use a single, thinner layer. The bolt itself is Carpenter 158® phosphated shot-peened steel to ensure precise dimensions with no concerns for hydrogen embrittlement in the critical lug area. A special green o-ring that is tested to not bind even at -40 degrees F is standard. The extractor spring is made from premium ultra-strong wire and is a low fatigue design to ensure the longest possible life. The extractor pin made from 300 ksi S2 tool steel – not the much lower strength S7 more commonly used.
Finally, a properly-staked carrier-key with Permatex® gasket-seal compound ensures no gas leakage. The trigger is a Geissele for great feel and reliability, and the stock and pistol grip by MagPul Industries. One magazine is included. Optics, mounts, and silencer are not included.
The recommended optional sound suppressor is the AAC 762-SDN-6™, which provides an average of 39.3 dB reduction with subsonic ammunition.
For more details on firearm, go to http://www.advanced-armament.com/MPW_p_628.html